Book Holders
Twisting the neck in order to read books that are laying on the desk can be avoided by using a book holder. Placing the holder either in-line with the monitor or right beside the monitor can greatly reduce neck stress.
Note: Check the Document Holder page for other possible solutions.
 |
 |
| Twisting the neck to read books can contribute to neck pain. | Placing books in line with the keyboard and monitor can reduce neck stress. |
| LEVO Bookholder Desktop Model | ||
|---|---|---|
| by Levo | ||
| Model # - DBH | ||
The Levo Bookholder Desktop Model clamps to a desktop (maximum desk thickness of 2"). It can support books up to a maximum weight of 5 lbs. Height above desk: maximum 8", minimum 4". Lateral or horizontal reach 22.5" (from pole to middle of book board). |
 |
|
| Price: | ||
| LEVO Bookholder Desktop Model | DBH: $90.00 | |
| Gig Light Accessory | GigLight: $35.00 | |
| Click here for more images and sample configurations. | ||
| LEVO Bookholder Free-Standing Model | ||
|---|---|---|
| by Levo | ||
| Model # - LBH | ||
The Levo Bookholder Free-Standing Model allows for positioning of books while standing, reading in bed, or even while working out on a treadmill. It can support books up to a maximum weight of 5 lbs. Height: maximum 48", minimum 26". Lateral or horizontal reach 22.5" (from pole to middle of book board). Base dimensions:12.5" x 12.5" x 3.5". Weight: 35 lbs. |
 |
|
| Price: | ||
| LEVO Bookholder Free-Standing Model | LBH: $200.00 | |
| LED Light Accessory | 35491: $40.00 | |
| eBook Adapter, Kindle Stand, iPad Stand Accessory | 34592: $30.00 | |
| Treadmill Extension Accessory | TMEXT: $30.00 | |
| Gig Light Accessory | GigLight: $35.00 | |
| Click here for more images and sample configurations. | ||
| LEVO Deluxe eBook and iPad Holder Floor Stand | ||
|---|---|---|
| by Levo | ||
| Model # - 33478 | ||
The LEVO Deluxe eBook and iPad Holder Floor Stand holds any eReader or tablet device so that you can read eBooks in comfort, whether sitting down, at your desk, or lying in bed (the device can be face-down). The patented design allows you to use your device extended over furniture, either to the right or left. The stand itself is easy to adjust with no tools required and has multiple adjusting angles. The base is made of cast iron for durability and to prevent easily tipping over the unit.. It can support books up to a maximum weight of 5 lbs. Height: maximum (floor to centre of platform): 53"; minimum (floor to centre of platform): 30"". Extension 15" (from edge of base to centre of platform). |
 |
|
| Price: | ||
| LEVO Deluxe eBook and iPad Holder Floor Stand | 33478: $190.00 | |
| Click here for more images and sample configurations. | ||
| LEVO eBook, iPad and Tablet PC Clamp on Stand | ||
|---|---|---|
| by Levo | ||
| Model # - DBH | ||
The LEVO eBook, iPad and Tablet PC Clamp on Stand from LEVO holds any eReader or tablet device so that you can read eBooks in comfort at your desk. Maximum desk thickness: 2". Height above desk: maximum 8", minimum 4". Lateral or horizontal reach 22.5" (from pole to middle of book board). |
 |
|
| Price: | ||
| LEVO eBook, iPad and Tablet PC Clamp on Stand | 33304: $90.00 | |
| Click here for more images and sample configurations. | ||
| Standard Microdesk Document Holder / Writing Surface | ||
|---|---|---|
| by Good Use Company | ||
| Model # - MD-SS (regular) | ||
| Model # - MD-COM-STD (compact) | ||
The Standard Microdesk is a clear, plastic sloping writing surface with adjustable non-slip feet that will 'straddle' your keyboard. It is made of heavy-duty plastic which provides a solid stable writing surface and doubles as a document/book holder. Two removable paper ledges (0.25" or 0.75" high) are also included along with a non-slip ruler/line guide. Available in a Regular and Compact version. |
 |
|
| Specifications: | Price: | |
| Regular: 22" wide x 12" deep | MD-SS: $100.00 | |
| Compact: 17" wide x 12" deep | MD-COM-STD: $70.00 | |
| Front: 3.0" - 3.75" high | ||
| Rear: 6.0" - 7.5" high | ||
| Click here for more images. |
| Step Microdesk Document Holder / Writing Surface | ||
|---|---|---|
| by Good Use Company | ||
| Model # - MD-STEP | ||
The Step Microdesk is designed for use with keyboard drawers / trays or on split level desks. It also works well for workstations where the monitor is placed very low on the desk or for individuals with graduated lens reading glasses. |
 |
|
| Specifications: | Price: | |
| Surface: 22" wide x 12" deep | MD-STEP: $100.00 | |
| Front: 3" - 5" high | ||
| Rear: 3" - 5" high |
| Standard Atlas Book Holder | ||
|---|---|---|
| by Dainoff Designs | ||
| Model # - AT-STD-BIR (birch) | ||
| Model # - AT-STD-BLK (black) | ||
| Model # - AT-STD-CHE (cherry) | ||
| Model # - AT-STD-MAH (mahogany) | ||
| Note: Only the black model is stocked. All other colours are special order. | ||
The Standard Atlas holds large, oversize books and documents. The deep shelf accommodates three-ring binders, reference texts, manuals as well as short documents. The attractive finish, rounded, user-friendly edges and convenience pencil well make this book holder a professional addition to any office. Page stoppers ensure that books and binders stay open and pages don't turn unintentionally. The Atlas is made out of vinyl coated medium density fiberboard in wood grain (birch, mahogany or cherry) or black finishes. Handy Accessories Included The spring-loaded clip holds a stack of documents up to 2" thick and is transparent, allowing you to see the documents underneath. A reversible line guide lets you select the wide side for viewing across a page, or the narrow side for columns of text. The supporting cord of this counter-balanced device can be black to mark vertical areas, or nearly transparent. This is the only line guide on the market that will work with thick documents or books. |
 |
|
| Click here for the Atlas Comparison Table. | ||
| Click here for more images. | ||
| Specifications: | Price: | |
| Shelf: 14.5" x 3" | AT-STD-BIR (birch): $100.00 | |
| Easel: 11.5" x 14" | AT-STD-BLK (black): $100.00 | |
| Angle Adjustability: 13° to 62°, 11 increments | AT-STD-CHE (cherry): $100.00 | |
| AT-STD-MAH (mahogany): $100.00 |
| Slim Atlas Book Holder | ||
|---|---|---|
| by Dainoff Designs | ||
| Model # - AT-SLIM-BIR (birch) | ||
When desk space is limited, the Slim Atlas from Dainoff Designs provides the same rugged build and practical design as the Standard Atlas but in a compact package. Especially practical for holding standard letter and legal-sized documents, the 8.5" wide shelf also provides adequate support for three-ring binders, reference texts, manuals, as well as short documents. The attractive finish, rounded, user-friendly edges, and convenient pencil well make this book holder a professional addition to any office. Page stoppers ensure that books and binders stay open and pages don't turn unintentionally. The Atlas is made out of vinyl coated medium density fiberboard in birchwood veneer. |
 |
|
| Click here for more images. | ||
| Specifications: | Price: | |
| Shelf: 8.5" x 3.0" | AT-STD-BIR (birch): $100.00 | |
| Easel: 7.5" x 14.25" | ||
| Angle Adjustability: 13° to 62°, 11 increments |
| Atlas Ultra | ||
|---|---|---|
| by Dainoff Designs | ||
| Model # - AT-STD-BLK (black) | ||
| Model # - AT-ULT-BEI (beige) | ||
| Model # - AT-ULT-SG (stone beige) | ||
| Model # - AT-ULT-WP (wild pear) | ||
| Note: Only the black model is stocked. All other colours are special order. | ||
The Atlas Ultra is a portable, foldable version of the Standard. It has 2 fixed settings of 15° and 30° off the vertical, and is easily assembled and disassembled in 30 seconds. It is composed of Trespa or Formica. Note: The line guide is an accessory for this bookstand. |
 |
|
| Click here for the Atlas Comparison Table. | ||
| Click here for more images. | ||
| Specifications: | Price: | |
| Shelf: 14" x 3" | AT-STD-BLK (black): $90.00 | |
| Easel: 11" x 14.5" | AT-ULT-BEI (beige): $90.00 | |
| Angle Adjustability: 13° to 62°, 2 increments | AT-ULT-SG (stone beige): $90.00 | |
| AT-ULT-WP (wild pear): $90.00 | ||
| Line Guide: $15.00 |
| Atlas LC Book Holder | ||
|---|---|---|
| by Dainoff Designs | ||
| Model # - AT-LC-BLK (black) | ||
The Atlas LC holds even larger thicker books than the Standard Atlas. It is especially useful for thick books where the first few pages are being referenced, as the shelf is 4" deep as compared to 3" deep on the Standard Atlas. Handy Accessories Included A reversible line guide lets you select the wide side for viewing across a page, or the narrow side for columns of text. The supporting cord of this counter-balanced device can be black to mark vertical areas, or nearly transparent. This is the only line guide on the market that will work with thick documents or books. The spring-loaded clip holds a stack of documents up to 2" thick and is transparent, allowing you to see the documents underneath. |
 |
|
| Click here for the Atlas Comparison Table. | ||
| Click here for more images. | ||
| Specifications: | Price: | |
| Shelf: 14.5" x 4 | AT-LC-BLK (black): $105.00 | |
| Easel: 12" x 14.5" | ||
| Angle Adjustability: 13° to 62°, 11 increments |